Advertisement
Quick Links
3 IN 1 TRI SCOOTER INSTRUCTIONS
Keycode: 42835868
WARNING!
Assembly by an adult.
Not suitable for children younger than 18 months old, due to danger of falling.
Protective equipment should be worn. Not suitable for children with a body
mass of more than 20 kg. Do not use on public roads.
Remove the scooter and all the parts from the box. Set out all the parts and read the
assembly instructions prior to use. Keep the packaging until assembly is complete.
18-24 MONTHS
36 MONTHS+
24-36 MONTHS
1
Advertisement
Related Manuals for KMART 42835868
Summary of Contents for KMART 42835868
- Page 1 3 IN 1 TRI SCOOTER INSTRUCTIONS Keycode: 42835868 WARNING! Assembly by an adult. Not suitable for children younger than 18 months old, due to danger of falling. Protective equipment should be worn. Not suitable for children with a body mass of more than 20 kg. Do not use on public roads.
-
Page 2: General Instructions
General instructions ● This scooter must be assembled by a responsible adult. Prior to use, make sure that the scooter has been assembled properly. Remove all the parts which are not necessary for play before giving the scooter to your child. Due to the skill it requires, the scooter must be used with care in order to avoid falls or collisions likely to injure the user or others. -
Page 3: Assemble The Handle Bar
- Shoes are mandatory and we strongly advise you to wear pants and long sleeve shirts to avoid injury if you fall. - Children should be reminded that the scooter should be used with caution, since it requires skill, so as to avoid falls or collisions causing injury to the user and others. Turn Left Turn Right Assembly Instructions:... - Page 4 2. INTERCHANGE THE HANDLE BAR Step 1: Press the spring button on bottom of handle bar. Step 2:Pull out the handle bar from the footplate. Step 3: Follow the above assembly instruction to interchange other handle bar. Spring button to lock the handle bar on footplate, or release the handle bar from...
-
Page 5: Care Instructions
Care Instructions A . Wheel bearings: Avoid going through water, oil or sand as this can damage to the wheel bearings. To look after the wheel bearings, systematically check that the wheels turn properly by turning the scooter upside-down and using your hand to spin the wheels. If the wheels do not spin they must then be removed to check their condition. - Page 6 C. Modifications: The original scooter must by no means be modified except for the maintenance-related changes mentioned in these instructions. D. Nuts and axles: These should be checked regularly. They can become loose after a while in which case they should be tightened. They can become worn and not tightened properly, in which case they should be replaced.