Safety Precautions - MIMAKI JV300-130 A Requests For Care And Maintenance

2. Safety Precautions

• Pay close attention to ventilation and be sure to wear the included safety glasses and gloves provided,
and the filtering face mask, when handling ink, maintenance cleaning solution, waste ink, or other
solutions used in this machine. Failure to do so may result in ink or other liquids splashing and coming
into contact with the skin, eyes, or mouth.
• Before cleaning, turn off the power switch and disconnect the power cable. It may cause an unexpected
accident.
• There are precautionary notes on ink on the ink cartridge. Read it carefully and fully understand it before
using it.
• Before using ink and cleaning solution, be sure to read the Safety Data Sheet (SDS).
• Keep ink away from fire. Also, be sure that the room is well ventilated when using or handling ink.
• Immediately wipe off any ink, maintenance washing liquid, waste ink, or other liquid used with the
product that contacts your skin. Wash using soap and rinse with plenty of water. Failure to wash off liquid
may result in skin inflammation. If your skin becomes irritated or painful, seek medical attention
immediately.
• If ink, maintenance washing liquid, waste ink, or any other liquid used in the product comes into contact
with your eyes, rinse immediately with plenty of clean water. Rinse for at least 15 minutes. If you wear
contact lenses and they can be easily removed, remove after rinsing for at least 15 minutes with clean
water. Be sure to rinse the undersides of your eyelids. Failure to rinse off liquid may result in blindness or
impaired vision. If your eyes become irritated or painful, seek medical attention immediately.
• If ink, maintenance washing liquid, waste ink, or any other liquid used in the product enters your mouth
or is swallowed, gargle with water immediately. Do not induce vomiting. Seek medical attention promptly.
Inducing vomiting may cause liquid to enter the airway.
• If a large amount of vapor is inhaled, move to a well-ventilated area, keep warm, and rest in a posture
that allows easy breathing. If the condition does not improve, seek medical attention promptly.
• To ensure ink ejection stability, this machine must periodically eject (flush) a small amount of ink
depending on the ink type when it is not used (output) for a long time.
When not using this machine for an extended period of time, execute the [CUSTODY WASH] function,
("When the Machine Is Not Used for a Long Time (CUSTODY WASH)" Chapter 4 of Operation Manual)
and turn off only the power button on the front panel. The main power switch on the right side should be
on (in the state of |) and the outlet should be inserted.
• When ink is mixed with water or alcohol, aggregates are generated. Do not to allow water or alcohol to
deposit to the nozzle surface, around the head, cap, and wiper.
• Do not use chemicals containing benzine, thinner or abrasives. The cover surface may be altered or
deformed.
• Do not lubricate the machine with lubricating oil. There is a risk of failure.
• Never disassemble the machine. Failure to do so may cause electric shock, fire or damage.
• Keep children away from this machine.
• Make sure that no moisture enters the machine. If the inside gets wet, it may cause electric shock, fire
and damage.
2