Table of Contents
Advertisement
CPCI Case System 6/7 U
24579-612
2.3 Subrack
The 7 U case is based on the Schroff ratiopacPRO-air system with EMC
shielding. The card cage enables the assembly of 8 CPCI front boards
(6 U, 4 HP, 160 mm deep) and 8 Rear I/O Boards (6 U, 4 HP, 80 mm deep).
The lower guide rails of the card cage are equipped with ESD clips.
Variations
The Schroff assembly service can customize your system with:
• Different Backplane configurations
• Drive mounting cassettes
• Special power supplies
More information in the catalogue or at www.schroff.biz
2.4 CPCI Backplane
The 6 U/ 8 slot Backplane provides:
• CompactPCI bus 64 bit (PICMG2.0 R.3.0) with System Slot right
• System slot expandable from 4 HP to 8 HP
• Rear I/O on P2, P4 and P5
• V(I/O) 5 V (adjustable to 3.3 V)
• Bridge connector for secondary Backplane
Applicable Specifications:
PICMG 2.0 R3.0 CPCI Core Specification
PICMG 2.01 R2.0 Hot Swap
PICMG 2.09 R1.0 System Management Bus
PICMG 2.10 R1.0 Keying
More information in the manual for the backplane order no.: 73972-075
www.schroff.biz
4
R1.1, December 16, 2010
Product Definition
Advertisement
Table of Contents
Need help?
Do you have a question about the SCHROFF CPCI Case System 6/7 U and is the answer not in the manual?
Questions and answers