Dual, triple, or quad air pressure gauge (5 pages)
Summary of Contents for Dakota Digital Odyssey II Series
Page 1
Series II ODYR-01-6 & SLX-01-6 PERFORMANCE SPEEDOMETER/TACHOMETER COMBO MOUNTING: The gauge requires a round hole 3-3/8” in diameter. It should be inserted into the opening from the front and the U- clamp will be installed from the back. Tighten the two nuts on the U-clamp so that the gauge is secure. GAUGE SETUP AND CALIBRATION The setup menus are entered by holding the switch in while turning the key on.
Page 2
The tachometer is adjustable from 1 to 15 cylinder signals and calibration is discussed below. Diesel engines will usually require a diesel tach adapter DSL-1 or DSL-2, available from Dakota Digital, Inc. The bar displays rpm x1000.
Page 3
SPEEDOMETER SETUP Press and hold the switch while turning the key on and starting the engine. Once the engine is running, release the switch. When “SPEED” is displayed, press the switch again and then release it. The message display should switch between “AUTO”, “ADJUST”, “UNIT”, “OUTPUT”, and “SERVIC”. METRIC SELECTION If you are setting the system up for metric displays, press the switch when “UNIT”...
GEAR INDICATOR SETUP This gauge can optionally display the gear position for automatic or manual transmissions. For automatic transmissions, Dakota Digital sender GSS-2000 or higher is required. For manual transmissions, the gauge can learn the positions based on speed and rpm.
Page 5
FUNCTION SWITCH The function switch on the front of the speedometer allows access to all of the mileage, rpm, and performance information. Pressing and releasing the function switch toggles through the different displays. The display sequence is as follows: SPEED MENU ODOMTR >...
Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought within a period of 24 months from date of original purchase. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with the sale of this product.