Toro 03638 Operator's Manual page 22

The Toro Company, 8111 Lyndale Ave. South, Bloomington, MN, USA declares that the following unit(s)
conform(s) to the directives listed, when installed in accordance with the accompanying instructions onto certain
Toro models as indicated on the relevant Declarations of Conformity.
Model No. Serial No.
03638 403450001 and Up
03639 403450001 and Up
03641 403450001 and Up
Relevant technical documentation has been compiled as required per Part B of Annex VII of 2006/42/EC.
We will undertake to transmit, in response to requests by national authorities, relevant information on this partly
completed machinery. The method of transmission shall be electronic transmittal.
This machinery shall not be put into service until incorporated into approved Toro models as indicated on the
associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in
conformity with all relevant Directives.
Certified:
John Heckel
Sr. Engineering Manager
8111 Lyndale Ave. South
Bloomington, MN 55420, USA
December 17, 2018
Declaration of Incorporation
Product Description
8-Blade Radial Reel DPA
Cutting Unit with 7in Reel
8-Blade Forward Swept Reel
DPA Cutting Unit with 7in Reel
11-Blade Forward Swept Reel
DPA Cutting Unit with 7in Reel
Invoice Description
7-INCH, 8-BLADE RR DPA
CUTTING UNIT
7-INCH, 8-BLADE FSR DPA
CUTTING UNIT
7-INCH, 11-BLADE FSR
DPA CUTTING UNIT
General Description
Cutting Unit
Cutting Unit
Cutting Unit
Authorized Representative:
Marcel Dutrieux
Manager European Product Integrity
Toro Europe NV
Nijverheidsstraat 5
2260 Oevel
Belgium
Tel. +32 16 386 659
Directive
2006/42/EC
2006/42/EC
2006/42/EC