Hdd/Ssd Smart Information; Nvme Configuration; Network Stack Configuration; Amd Cbs - Asus ROG STRIX X570-F GAMING Manual

USB Device Enable
This item allows you to enable or disable the USB device. Configuration options: [Disabled]
[Enabled]
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to section 1.1.2 Motherboard layout for the location of the USB ports.
3.6.9

HDD/SSD SMART Information

This menu displays the SMART information of the connected devices.
NVM Express devices do not support SMART information.
3.6.10

NVMe Configuration

The items in this menu allow you to configure the NVMe device options.
3.6.11

Network Stack Configuration

The items in this menu allow you to enable or disable the UEFI network stack.
3.6.12

AMD CBS

The items in this menu allow you to configure the AMD CBS Setup page.
3.7

Monitor menu

The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Q-Fan Configuration
The subitems in this menu allow you to configure the Q-Fan features.
Qfan Tuning
Click this item to automatically detect the lowest speed and configure the minimum duty cycle
for each fan.
3.8

Boot menu

The Boot menu items allow you to change the system boot options.
Fast Boot
[Disabled] Allows your system to go back to its normal boot speed.
[Enabled] Allows your system to accelerate the boot speed.
The following items appear only when you set the Fast Boot to [Enabled].
ASUS ROG STRIX X570-F GAMING
3-17