Onboard Leds - Asus ROG STRIX X570-F GAMING Manual

1.1.6

Onboard LEDs

1. Q LEDs (DRAM, CPU, VGA, BOOT)
Q LEDs check key components (DRAM, CPU, VGA card, and booting devices) in
sequence during motherboard booting process. If an error is found, the corresponding
LED remains lit until the problem is solved. This user-friendly design provides an
intuitive way to locate the root problem within seconds.
ROG STRIX X570-F GAMING
CPU/ DRAM/ BOOT/ VGA LED
The order which the LEDs light up may vary per CPU.
2. Standby Power LED (SB_PWR)
The motherboard comes with a standby power LED. The LED lights up to indicate that
the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
ROG STRIX X570-F GAMING Standby power LED
1-8
STRIX X570-f GAMING
STRIX X570-f GAMING
BOOT (YELLOW GREEN)
VGA (WHITE)
CPU (RED)
DRAM (YELLOW)
SB_PWR
ON OFF
Standby Power Powered Off
Chapter 1: Product Introduction