Sony h.ear on 3 Wireless NC Help Manual page 11

5.
(right) mark
6.
Noise canceling function microphones
Picks up the sound of the noise when the noise canceling function is in use.
7.
Built-in antenna
A Bluetooth antenna is built into the headset.
8.
N-Mark
9.
Left unit
10.
Touch sensor control panel
Remotely controls music playback of the connected Bluetooth device or performs other operations using touch
operation.
11.
Right unit
12.
C (custom) button
Operate when switching the noise canceling function and Ambient Sound Mode, etc.
13.
Indicator (red/blue)
Lights up in red while charging.
Lights up in red or blue to indicate the power or communication status of the headset.
14.
(power) button
15.
Call microphone
Picks up the sound of your voice when talking on the phone.
16.
Headphone cable input jack
Connect a music player, etc. using the supplied headphone cable. Make sure that you insert the cable until it clicks. If
the plug is not connected correctly, you may not hear the sound properly.
17.
USB Type-C port
Connect the headset to an AC outlet via a commercially available USB AC adaptor or to a computer with the supplied
USB Type-C cable to charge the headset.
Related Topic
About the indicator
Checking the remaining battery charge
5-007-092-11(3) Copyright 2019 Sony Corporation
11