Sony h.ear on 3 Wireless NC Help Manual page 80

Help Guide
Wireless Noise Canceling Stereo Headset
h.ear on 3 Wireless NC (WH-H910N)
What is noise canceling?
The noise canceling circuit actually senses outside noise with built-in microphones and sends an equal-but-opposite
canceling signal to the headset.
Note
The noise canceling effect may not be pronounced in a very quiet environment, or some noise may be heard.
Depending on how you put on the headset, the noise canceling effect may vary or a beeping sound (feedback) may be heard. In
this case, take off the headset and put it on again.
The noise canceling function works primarily on noise in the low frequency band such as vehicles and air conditioning. Although
noise is reduced, it is not completely canceled.
When you use the headset in a car or a bus, noise may occur depending on street conditions.
Mobile phones may cause interference and noise. Should this occur, move the headset further away from the mobile phone.
Do not cover the headset microphones with your hand. The noise canceling function or the Ambient Sound Mode may not work
properly, or a beeping sound (feedback) may occur. In this case, remove your hand from the headset microphones.
A: Noise canceling function microphones
Related Topic
Using the noise canceling function
5-007-092-11(3) Copyright 2019 Sony Corporation
80