Digital Equipment VAX 4000 Model 100 Upgrade Instructions page 5

Remove Fixed Disk Drives
Note: The DEC 3000 system can hold two
fixed disk drives and one removable-media
drive.
1. Press and hold the spring clip that locks
the disk drive in position.
2. Refer fo the figure, and push the disk
drive towards the spring clip until the
rubber grommets on the bottom of the
disk drive release from the cutouts in the
drive mounting shelf.
Spring
Clip
3. Lift the disk drive up from the drive
mounting shelf and release the spring
clip.
4. Disconnect the SCSI and power cables
from the back of the drive.
5. Set the drive aside on an antistatic mat.
MLO-010738