Complete The Upgrade - Digital Equipment VAX 4000 Model 100 Upgrade Instructions

Complete the Upgrade

1. Test the installation by turning on your
new system and entering the show
device command at the console
prompt.
The drives you upgraded should appear
in the display. If a drive does not
display, it has not been installed properly.
2. Return your VAX 4000 system to Digital
as follows:
a. Pack the VAX 4000 system unit
securely in packing material for
shipment.
b. Attach the return-address label that
came in the upgrade accessory kit.
3. Contact your Digital service representa-
tive to upgrade your hardware service
contract.
© Digital Equipment Corporation 1993 All rights reserved.
Printed in U.S.A.
S2265