Table of Contents
Advertisement
Installing/mounting
3.4 Mounting
①
②
Flange, gasket, and hardware supplied by customer.
Note
Tighten the flange bolts evenly in order to ensure a good seal between the mating flanges.
Potential performance degradation
Overtightening can cause performance degradation.
• Do not tighten with excessive force.
①
②
③
Customer flanged standpipe. If a metal flange must be welded to pipe, refer to Liquid
Applications - Standpipes in the Transducer Applications Manual.
22
Nipple welded to blind flange
Optional hazardous seal
CAUTION
Optional hazardous seal
Factory flanged transducer
Bolt
④
Gasket (customer supplied)
⑤
Customer flange, flat face only
⑥
Nut
Compact Operating Instructions, 09/2018, A5E43390688-AB
Transducers
Advertisement
Table of Contents
