Disconnecting The Regulator; Disconnecting The Regulator From The Cylinder - Weber Q Series Owner's Manual

DISCONNECTING THE REGULATOR FROM THE
CYLINDER
We recommend that you refill the cylinder before it is
completely empty. To refill, take cylinder to a "Gas Propane"
dealer.
A) Remove the cylinder by shutting off the gas supply and
disconnecting the hose and regulator assembly from
the cylinder.
m WARNING: Make sure that the cylinder or
regulator valve is closed.
Identify your regulator type. Follow the disconnection
instructions for that regulator.
Disconnect by Turning Anti-Clockwise
Unscrew regulator from cylinder by turning fitting anti-
clockwise (1).
Disconnect by Turning Clockwise
Unscrew regulator from cylinder by turning fitting
clockwise (2) (3).
Disconnect by Turning Lever
Turn regulator lever clockwise (4) to the off position.
Push in on regulator lever (5) until it releases from
cylinder (6).
Disconnect by Sliding Collar
Make sure regulator lever is in the off position
(7) (9). Slide the collar of the regulator up (8) (10) to
disconnect from the cylinder.
B) Exchange empty cylinder for a full cylinder.
14
WWW.WEBER.COM

DISCONNECTING THE REGULATOR

1
2
3
4
7
9
6
5
8
10