Table of Contents
Advertisement
Quick Links
BLACK KNIGHT
SERVICE AND OPERATION MANUAL
SERVICE AND OPERATION MANUAL
WARNING
IMPORTANT HEALTH WARNING: PHOTOSENSITIVE SEIZURES - A very small percentage of people may experience a seizure when exposed to certain visual images, in-
cluding flashing lights or patterns. Even people with no history of seizures of epilepsy may have an undiagnosed condition that can cause "photosensitive epileptic seizures"
due to certain visual images, flashing lights or patterns. Symptoms can include lightheadedness, altered vision, eye or face twitching, jerking or shaking of arms or legs,
disorientation, confusion, momentary loss of awareness, and loss of consciousness or convulsions that can lead to injury from falling down or striking nearby objects.
IMMEDIATELY STOP PLAYING AND CONSULT A DOCTOR IF YOU EXPERIENCE ANY OF THESE SYMPTOMS.
ATTENTION! IMPORTANT WARRANTY INFORMATION
The electronics system, node network architecture, mechanical devices and associated software control systems in this pinball machine are designed to work with genuine
Stern Pinball accessories and devices.
Installation of non-authorized accessories, lamps, LED's, motors or other devices or modification of electro-mechanical devices may damage the system and will void your
warranty.
Stern Pinball machines are assembled in Elk Grove Village, Illinois, USA. Stern Pinball has inspected each game element to ensure it meets our quality standards.
Each pinball machine has unique characteristics that make it a one-of-a-kind American made product. Each will have variations in appearance resulting from differences
in the machine's particular wood parts, individual printed art and mechanical assemblies. No playfield is perfectly flat and varies depending on the season. Game play will
result in playfield dimpling as the harder steel ball contacts the wood and coating; over time multiple dimples will blend to make them less noticeable. Normal plastic insert
crazing (tiny stress cracks) and ghosting (small cloudy areas around insert edges) are often seen in pinball machines, due to a combination of plastic mold stress, pushing of
inserts into purposely undersized holes, and heating and breaking of inserts' plastic "skin" when the playfield is sanded.
Created and distributed under license from Williams Electronics Games, Inc. Black Knight ™, Black Knight 2000 ™ and Sword of Rage ™ are trademarks of Williams Electronics Games, Inc.
© 1980, 1989, 2019 Williams Electronics Games, Inc. All rights reserved.
Games configured for North America operate on 60 cycle electricity only. These games will not operate in countries with 50 cycle electricity (Europe, UK, Australia).
SWORD OF RAGE
BLACK KNIGHT PRO #500-55N1-01
1-800-KICKERS - parts.service@sternpinball.com
www.sternpinball.com - facebook.com/sternpinball
MANUAL #780-50N1-00
Advertisement
Table of Contents
Related Manuals for Stern Pinball BLACK KNIGHT SWORD OF RAGE 500-55N1-01
Summary of Contents for Stern Pinball BLACK KNIGHT SWORD OF RAGE 500-55N1-01
- Page 1 Stern Pinball machines are assembled in Elk Grove Village, Illinois, USA. Stern Pinball has inspected each game element to ensure it meets our quality standards. Each pinball machine has unique characteristics that make it a one-of-a-kind American made product. Each will have variations in appearance resulting from differences in the machine’s particular wood parts, individual printed art and mechanical assemblies.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Setup and Moving ........3 Ball Shooter Assembly ........40 Auto Launch Assembly ........40 First-Time Setup Instructions ....... 3 5.10 Ball Trough Assembly......... 41 Adjustments Menu ..........6 5.11 Slingshot Assembly..........41 Transporting the Game ........7 5.12 Flipper Assembly, Left ........ -
Page 3: Setup And Moving
MOVE AND MANEUVER THE SETUP INSTRUCTIONS TOOLS REQUIRED GAME. USE PROPER MOVING EQUIPMENT EXTREME Your brand new Stern Pinball Machine is • 5/8” Socket Wrench CARE WHILE HANDLING. STERN carefully packed for safety and security. • Utility Knife PINBALL MACHINES... - Page 4 SETUP AND MOVING FIRST-TIME SETUP CONTINUED 15. Cut nylon strapping and remove 18. Open the front coin door. 21. Store the backbox keys, if desired, protective strap corner guards. 19. Reach into the game and remove on the metal hook located in the 16.
- Page 5 SETUP AND MOVING FIRST-TIME SETUP CONTINUED SPIKE PINBALL SOFTWARE 30. If pinballs were already installed into the lower ball trough, remove them before lifting the playfield. UPDATE INSTRUCTIONS 31. Grasp the lower arch between the flippers, and firmly but gently pull directly up to raise the playfield 8 to 12 Obtain game software update file (filename ends inches.
-
Page 6: Adjustments Menu
SETUP AND MOVING 1.2 ADJUSTMENTS MENU STANDARD ADJUSTMENTS STANDARD ADJUSTMENT #1 appears with the adjustment name flashing. While the adjustment name is flashing press [<] [>] to move between adjustments. Perform the below steps to review the adjustments. To change the adjustment setting press SELECT. While the Enter the Service Menu, then enter the Standard Adjustments adjustment setting is flashing, press [<] [>] repeatedly until Menu. -
Page 7: Transporting The Game
SETUP AND MOVING 1.3 TRANSPORTING THE GAME CAUTION When transporting the game, such as in the back of a truck or with a hand truck, the game’s backbox must be secured to prevent damage to the side rails. NEVER TRANSPORT THE GAME IN A MOVING VEHICLE WITH THE BACKBOX RAISED! TWO PEOPLE 1. -
Page 8: Maintenance
SETUP AND MOVING 1.4 MAINTENANCE REGULAR MAINTENANCE - (MONTHLY/500 COMMON PINBALL TOOLS GAMES) • Common nut drivers (¼”, 5/16”, 11/32", ⅜”) • Phillips screwdriver • Remove the playfield glass • Standard Allen wrench/Hex key set • Enter the software diagnostics menu, start lamp test, then •... -
Page 9: Spike System And Node Guide
48V system power. SPIKE standard I/O nodes are low-power nodes that read switch inputs and output to A Stern Pinball machine based on the SPIKE system will have at standard-brightness LEDs. Standard I/O nodes use the node bus... -
Page 10: Spike Node Programming
SPIKE SYSTEM AND NODE GUIDE SPIKE SYSTEM AND NODE GUIDE CONTINUED 2.5 SPIKE NODE PROGRAMMING INPUT/OUTPUT PROTECTIONS SPIKE features built-in short-circuit, static electricity, and other The SPIKE nodes are smart nodes that have on-board pro- protections to maximize reliability. If an LED, coil or other device cessors and run embedded code. -
Page 11: Light, Switch, And Driver Reference
LIGHT, SWITCH, AND DRIVER REFERENCE NODE BOARD ID INSTRUCTION SHEET 3. LIGHT, SWITCH, AND DRIVER REFERENCE PLAYFIELD FRONT ™ NODE 8 NODE 8a MODEL BACKBOX NODE 0 NODE 8b CN22 CN11 CPU NODE 0 NODE 9a CABINET CN13 Node Bus Cable (RJ45) 604-5004-08-XX CABINET NODE 1 NODE 9... -
Page 12: Driver Reference
SPIKE SYSTEM AND NODE GUIDE 3.2 DRIVER REFERENCE Name Node Connector Ret. Ret. Wire Voltage V+ Color Location Type Address Part Number Trough ORG GRY GRY ORG Playfield Coil - 27-1500 8-DR-1 090-5004-ND Auto Plunger ORG WHT GRY ORG Playfield Coil - 23-800 8-DR-4 090-5001-ND... - Page 13 SPIKE SYSTEM AND NODE GUIDE DRIVER REFERENCE CONTINUED Figure 3.2.1. Playfield driver locations (top view). BLACK KNIGHT PRO MANUAL 500-55N1-01 Created and distributed under license from Williams Electronics Games, Inc. Black Knight ™, Black Knight 2000 ™ and Sword of Rage ™ are trademarks of Williams Electronics Games, Inc. ©...
-
Page 14: Switch Reference
SPIKE SYSTEM AND NODE GUIDE 3.3 SWITCH REFERENCE Name Node Node Conn. Input Input Wire GND Ground Wire Location Type Address Part Number Left Outlane CN11 LGN RED 11/12 BLK ORG Playfield Rollover 8-SW-17 500-9935-03 Left Return Lane CN11 LGN ORG 11/12 BLK ORG Playfield Rollover... - Page 15 SPIKE SYSTEM AND NODE GUIDE SWITCH REFERENCE CONTINUED Name Node Node Conn. Input Input Wire GND Ground Wire Location Type Address Part Number Castle Spinner CN10 GRY YEL 7/8/9 BLK BLU Playfield Micro 9-SW-16 180-5010-04 Castle VUK CN10 GRY ORG 7/8/9 BLK BLU Playfield...
- Page 16 SPIKE SYSTEM AND NODE GUIDE SWITCH REFERENCE CONTINUED Figure 3.3.1. Playfield switch locations (top view). Continued on next page... BLACK KNIGHT PRO MANUAL 500-55N1-01 Created and distributed under license from Williams Electronics Games, Inc. Black Knight ™, Black Knight 2000 ™ and Sword of Rage ™ are trademarks of Williams Electronics Games, Inc. ©...
- Page 17 SPIKE SYSTEM AND NODE GUIDE SWITCH REFERENCE CONTINUED Name Node Node Conn. Input Input Wire GND Ground Wire Location Type Address Part Number 100 Lockdown Button TAN WHT BLK WHT Cabinet Leaf 1-SW-2 180-5218-00 103 Start Button BLK WHT Cabinet Micro 1-SW-11 500-1060-44-LED...
-
Page 18: Light Reference
SPIKE SYSTEM AND NODE GUIDE 3.4 LIGHT REFERENCE Name Node Node Conn. Ret. Ret. Wire Src. Pin Src. Location Type Light Address Part Number Ext. Wire Color Coin Enable BLK GRY Coin Door Digital Out 1-LP-0 Start Button YEL BRN Cabinet Feature White... - Page 19 SPIKE SYSTEM AND NODE GUIDE LIGHT REFERENCE CONTINUED Figure 3.4.1. Playfield light locations (top view). Continued on next page... BLACK KNIGHT PRO MANUAL 500-55N1-01 Created and distributed under license from Williams Electronics Games, Inc. Black Knight ™, Black Knight 2000 ™ and Sword of Rage ™ are trademarks of Williams Electronics Games, Inc. ©...
- Page 20 SPIKE SYSTEM AND NODE GUIDE LIGHT REFERENCE CONTINUED Name Node Node Conn. Ret. Ret. Wire Src. Pin Src. Location Type Light Address Part Number Ext. Wire Color Lightning Bolt 9-B LED04 - Playfield Feature 8-LP-19 520-8083-00 Lightning Bolt 10-R LED03 - Playfield Feature 8-LP-14...
- Page 21 SPIKE SYSTEM AND NODE GUIDE LIGHT REFERENCE CONTINUED Name Node Node Conn. Ret. Ret. Wire Src. Pin Src. Location Type Light Address Part Number Ext. Wire Color Extra Ball LED6 Playfield Feature White 9-LP-13 520-8084-00 Mystery LED7 Playfield Feature White 9-LP-14 520-8084-00 Shield Target Lightning...
-
Page 22: Motor Reference
SPIKE SYSTEM AND NODE GUIDE LIGHT REFERENCE CONTINUED Name Node Node Conn. Ret. Ret. Wire Src. Pin Src. Location Type Light Address Part Number Ext. Wire Color 150 Coin Door GI YEL- Coin Door G.I. White 1-LP-1 112-5033-08 151 Bottom GI-RED CN15 5 RED BLK Playfield... -
Page 23: Electronic Pinouts And Schematics
ELECTRONIC PINOUTS AND SCHEMATICS 4. ELECTRONIC PINOUTS AND SCHEMATICS 4.1 SPIKE-2 CPU NODE 0 509-1003-01 DIRECT SWITCH MAPPING (CN25) The coin-door diagnostic switches are connected directly to the CPU node via the Cabinet Node. Note that both the CPU and Cabinet nodes are required for diagnostic switch operation. - Page 24 ELECTRONIC PINOUTS AND SCHEMATICS SPIKE-2 CPU NODE 0 CONTINUED AUDIO PINOUTS Type Description Minimum Impedance Power (RMS) .156" 5-pin Speaker Right Ground (-) 4 Ohms Header Speaker Right (+) 4 Ohms Speaker Left Ground (-) 4 Ohms Speaker Left (+) 4 Ohms .100"...
- Page 25 ELECTRONIC PINOUTS AND SCHEMATICS USA & INTERNATIONAL (NON-EURO) STANDARD PRICING SELECT TABLE BLACK KNIGHT PRO MANUAL 500-55N1-01 Created and distributed under license from Williams Electronics Games, Inc. Black Knight ™, Black Knight 2000 ™ and Sword of Rage ™ are trademarks of Williams Electronics Games, Inc. ©...
- Page 26 ELECTRONIC PINOUTS AND SCHEMATICS EURO SUMMARY & INTERNATIONAL (EURO) STANDARD PRICING SELECT TABLE COIN MECHANISMS (SWITCHES) CPU/SOUND PCB COUNTRY PRICING SCHEME Requires SPI C O I N S T H R U . . . S L O T : DIP SWITCH SW1 SETTING Coin Card(s)
-
Page 27: Cabinet Node 1
ELECTRONIC PINOUTS AND SCHEMATICS 4.2 CABINET NODE 1 520-6967-72 Type Description Wire Color .100" 8-Pin Header Universal Card Link Coin 1 Meter 1 Notch Coin Enable Ticket Enable Ground .100" 5-Pin Header low ticket Ground Ticket Low sw. Ticket Low 5V Out .100"... -
Page 28: Lower Playfield 48V Driver Pinout Node 8
ELECTRONIC PINOUTS AND SCHEMATICS 4.3 LOWER PLAYFIELD 48V DRIVER PINOUT NODE 8 520-7017-72 CN11 .100" 12-Pin Header 8-SW-26 Switch 8-SW-27 Switch 8-SW-17 Switch LGN-RED 8-SW-18 Switch LGN-ORG 8-SW-19 Switch LGN-YEL 8-SW-20 Switch LGN-BLU 8-SW-21 Switch LGN-VIO 8-SW-22 Switch 8-SW-23 Switch LGN-WHT Ground BLK-ORG... - Page 29 ELECTRONIC PINOUTS AND SCHEMATICS 4.4 MID UPPER PLAYFIELD 48V DRIVER PINOUT NODE 9 520-7017-72 CN11 .100" 12-Pin Header 1 9-SW-26 Switch 9-SW-27 Switch 9-SW-17 Switch TAN-YEL 9-SW-18 Switch TAN-GRN 9-SW-19 Switch TAN-BLU 9-SW-20 Switch TAN-VIO 9-SW-21 Switch 9-SW-22 Switch 9-SW-23 Switch LGN-GRY Ground BLK-GRY...
-
Page 30: Trough Serial Opto Receiver Extension 8A
ELECTRONIC PINOUTS AND SCHEMATICS 4.5 TROUGH SERIAL OPTO 4.7 LOWER MID LED BOARD 8B RECEIVER EXTENSION 8A 520-8083-00 520-7001-00 Type Description Wire Color .100" 7-Pin Header Ground MISO Output Data VIO-BLK MOSI Input Data SCK Serial Clock VIO-RED RCK Register Clock VIO-ORG +5 VDC IN 4.6 TROUGH SERIAL OPTO... -
Page 31: Upper Mid Led Board 9A
ELECTRONIC PINOUTS AND SCHEMATICS 4.8 UPPER MID LED BOARD 9A 520-8084-00 .100" 12 -Pin Header 1 +5 VDC +5 VDC +5 VDC +5 VDC LP-31 Light Return RED-GRN LP-32 Light Return LP-33 Light Return BLU-GRN LP-34 Light Return RED-BLU LP-35 Light Return GRN-BLU LP-36 Light Return LP-37 Light Return... -
Page 32: Dual Motor Driver
ELECTRONIC PINOUTS AND SCHEMATICS 4.9 DUAL MOTOR DRIVER 4.10 OPTO SLOT TWIN 520-5338-00 520-8056-00 PHA-0 PHA-1 PHB-0 PHB-1 LGND Type Description Wire Color Type Description Wire Color .100" 6-Pin Connector Ground .100" 4-Pin Header +6 VDC IN PHB1 Opto 1 PNK-GRN PHB0 Opto 2... -
Page 33: Upper Left Led Board
ELECTRONIC PINOUTS AND SCHEMATICS 4.11 UPPER LEFT LED BOARD 4.13 MAIN POWER SUPPLY 520-8085-00 011-5003-00 +V ADJ. Type Description Wire Color .100" 6-Pin Header +5 VDC LED 1-R RED-YEL LED 1-G GRN-YEL LED 1-B BLU-YEL LED 2 BRN-ORG LED 3 BRN-YEL Type Description... -
Page 34: Power Distribution Board
ELECTRONIC PINOUTS AND SCHEMATICS 4.14 POWER DISTRIBUTION BOARD 4.15 POWER PLUG WIRING 520-5343-01 CAUTION TO MAINTAIN SAFETY, GROUND WIRE FROM LINE FILTER IS TO BE MOUNTED FIRST ON GROUNDING STUD AND SECURED WITH NUT. ALL OTHER GROUNDS MAY THEN BE ATTACHED TO GROUNDING STUD. -
Page 35: Parts Reference
PARTS REFERENCE 5. PARTS REFERENCE 5.1 PLAYFIELD RUBBER PARTS RUBBER O-RINGS Size (ID) Size (OD) Durometer Color Part Number 3/16" Black 545-5348-01 5/16" Black 545-5348-02 3/4" Black 545-5348-04 1" Black 545-5348-05 1-1/4" Black 545-5348-06 1-1/2" Black 545-5348-07 1-3/4" Black 545-5348-21 2-1/2"... -
Page 36: Playfield Assemblies, Top
PARTS REFERENCE 5.3 PLAYFIELD ASSEMBLIES, TOP Part Number Description 500-1117-N1 Bottom Arch Assembly 755-51N1-12-Y Instruction Card 755-5400-02-Y Coin Card (USA) 535-8385-00 Welded Hanger Bracket 260-5000-00 Pinballs 500-6815-00 Bubble Level Assembly 535-1591-00 Spinner Bracket 515-7088-00 Spinner Target 511-1966-02 Left Electric Gate 511-1966-01 Right Electric Gate 511-1995-00... -
Page 37: Playfield Assemblies, Bottom
PARTS REFERENCE 5.4 PLAYFIELD ASSEMBLIES, BOTTOM Part Number Description 520-7017-72 Core Node Driver Board 520-8083-00 LED Board - 8b 520-8085-00 LED Board - Left 520-8084-00 LED Board - 9a 520-5338-00 Dual Motor Driver 535-2033-00 Node Bracket 500-5329-03 Bracket Pivot Pin 535-5988-01 Edge Slide Bracket 535-6862-05... -
Page 38: Backbox Parts
PARTS REFERENCE 5.5 BACKBOX PARTS LCD BACKBOX LCD BACKBOX 5009995-XX DOMESTIC VERSION 500-9995-XX Figure 5.5.2. Backbox internal assemblies and components Figure 5.5.1. Backbox external assemblies and components EXTERNAL INTERNAL Part Number Description Part Number Description 660-5052-00 Backglass 509-1003-01 CPU Node Board 830-8427-N1 Translite Art 520-5343-01... -
Page 39: Cabinet Parts
PARTS REFERENCE 5.7 CABINET PARTS Part Number Description 525-6011-00 Cabinet (Plunger & Two Buttons) 535-5989-00 Slide & Pivot Bracket - Left Side 535-5990-00 Slide & Pivot Bracket - Right Side 535-0399-00 Cabinet Playfield Support Bracket 500-2440-00 Front Molding Assembly - Wrinkle Black 535-7999-00 Pivot Hinge, Left - Wrinkle Black 535-7999-01... -
Page 40: Ball Shooter Assembly
PARTS REFERENCE 5.8 BALL SHOOTER ASSEMBLY 5.9 AUTO LAUNCH ASSEMBLY 500-6146-00-07 500-9818-01 Part Number Description 535-5067-02 Housing Assembly 266-5001-07 Compressed Spring (Long) - Orange 242-5014-00 Washer 3/8 ID x 5/8 OD x 1/16 515-6557-00 Rod Assembly 266-5010-00 Compressed Spring (Short) 270-5012-00 Retaining Ring, 3/8"... -
Page 41: Ball Trough Assembly
PARTS REFERENCE 5.10 BALL TROUGH ASSEMBLY 5.11 SLINGSHOT ASSEMBLY 500-9820-00 500-9920-01 Part Number Description 515-7811-00 MAIN BRKT. BALL TROUGH 515-7812-00 COIL BRACKET, BALL TROUGH 237-5975-04 SCREW, 8-32 X 1/4" HWH SWAGE SERR 266-5020-00 COMPRESSION SPRING-CONICAL 535-5203-03 COIL RETAINING BRACKET Part Number Description 545-5076-01 COIL SLEEVE... -
Page 42: Flipper Assembly, Left
PARTS REFERENCE 5.12 FLIPPER ASSEMBLY, LEFT 5.13 FLIPPER ASSEMBLY, RIGHT 500-6543-12-ND 500-6543-02-ND Part Number Description Part Number Description 515-6617-01 FLIPPER BASE PLATE LEFT KIT W/ 515-6617-00 FLIPPER BASE PLATE RIGHT KIT W/ BRACKET MOUNT HARDWARE BRACKET MOUNTING HARDWARE 515-6308-01 COIL STOP BRACKET 515-6308-01 COIL STOP BRACKET 180-5149-00... -
Page 43: Pop Bumper Assembly
PARTS REFERENCE 5.14 POP BUMPER ASSEMBLY 516-6784-XX Part Number Description 515-6459-01L BUMPER/RING TOP ASSY, W/ LED 1 515-6459-04-ND BUMPER BOTTOM ASSY, NO DIODE ID Part Number Description 500-9934-01 POP BUMPER SWITCH ASSY-2 - LUG-LEFT 240-5005-00 6-32 NYLON STOP NUT 090-5044-ND COIL - 26-1200 10 237-5976-01 #6-32 X 1/4"... -
Page 44: Twin Flail Tower Assembly
PARTS REFERENCE 5.15 TWIN FLAIL TOWER ASSEMBLY 500-1127-02 LOCTITE 222 SEE NOTE 3 LOCTITE 222 ASSEMBLY NOTES: 1. PULLEYS ITEM 15 AND TIMING BELT ITEM 20 MUST BE PROPERLY REGISTERED DURING ASSEMBLY, SUCH THAT UPPER DRIVESHAFT ITEM 12 AND LOWER DRIVESHAFT ITEM 19 BE ORIENTED AS SHOWN: ITEM 12 GROOVE PERPENDICULAR TO ITEM 19 GROOVE. -
Page 45: Vuk Assembly
PARTS REFERENCE ITEM # QTY PART # DESCRIPTION 530-7985-01 SHAFT, FLAIL MOUNT - PARIS 511-1963-01 FLAIL ASSEMBLY, PARIS 5.16 VUK ASSEMBLY 237-6348-00 SCREW, 1/4-20 X 1/2" SHCS 5.17 TWIN FLAIL ASSEMBLY 237-6345-00 SCREW, 8-32 X 1/4", BUTTON HEAD SOCKET CAP 530-7988-01 SPRING SUPPORT, TAPPED, TWIN FLAIL ASSEMBLY ITEM # QTY PART #... -
Page 46: 3-Bank Drop Target Assembly
PARTS REFERENCE 5.19 3-BANK DROP TARGET ASSEMBLY 500-7216-13 REVISION HISTORY ITEM NO. PART NUMBER DESCRIPTION QTY. REV. DESCRIPTION DATE APPROVED PRODUCTION RELEASE 02/16/2015 545-6163-03 LEDGE, 3-BANK DROP TARGET REDRAWN WITH EXPLODED VIEW FOR 242-5091-00 WASHER, 1/2 X 17/64 X .03 - DT 17694 2/13/2018 ASSEMBLY CLARITY;... -
Page 47: One Way Gate Assembly, Upper Vuk
PARTS REFERENCE ITEM # QTY PART # DESCRIPTION 5.20 ONE WAY GATE ASSEMBLY, 5.22 ELECTRIC GATE ASSEMBLY, 510-7757-00 SPRING FLAP/BRACKET ASSEMBLY 535-1958-00 WIRE, ONE WAY GATE UPPER VUK LEFT ITEM # QTY PART # DESCRIPTION 515-1981-00 BRACKET, ONE WAY GATE, LEFT 511-5033-00 ASSY, ELEC GATE LEFT, RAIL MT 232-5209-00 SCREW, 6-32 X 3/16"... -
Page 48: Flame Board Assembly
PARTS REFERENCE ITEM # QTY PART # DESCRIPTION 509-2006-00 FLAME BOARD LED MODULE 254-5090-01 PLASTIC SPACER #4 SCREW, 3/16" OD - 3/16" LENGTH 830-1032-00 DIFFUSER LENS, FLAME BOARD 5.24 FLAME BOARD ASSEMBLY 5.26 SHIELD BRACKET ASSEMBLY 254-5090-03 PLASTIC SPACER #4 SCREW, 3/16" OD - 1/8" LENGTH 237-5863-00 SCREW, 4-40 X 3/4 PRH 535-2031-00 BRACKET, FLAME PC BOARD 511-4064-00... -
Page 49: Shield Downpost Assembly
PARTS REFERENCE 5.28 SHIELD DOWNPOST 5.29 BALL GUIDE #2 ASSEMBLY ASSEMBLY 511-2748-02 ITEM # QTY PART # DESCRIPTION 535-1862-02 BALL GUIDE # 02, PARIS PRO 511-2741-00 511-7877-00 SPINNER ASSY, BALL GUIDE MNT 237-6151-00 SCREW, 4-40 X 5/16" PFH U/C MS BALL GUIDE ASSEMBLY # 02, PARIS PRO 511-2748-02... -
Page 50: Ball Guide #4 Assembly
PARTS REFERENCE ITEM # QTY PART # DESCRIPTION 5.31 BALL GUIDE #4 ASSEMBLY 5.33 BALL GUIDE #7 ASSEMBLY 535-2022-04 BALL GUIDE # 04 - PARIS PRO 511-7877-00 SPINNER ASSY, BALL GUIDE MNT 626-5057-01 RUBBER BUMPER - BLUE 535-1355-00 RIGHT RAMP EDGE PROTECTOR PRO 237-6151-00 SCREW, 4-40 X 5/16"... -
Page 51: Ball Guide #9 Assembly
PARTS REFERENCE 5.35 BALL GUIDE #9 ASSEMBLY 5.37 BUTY #5 ASSEMBLY 511-1941-07 511-2749-05 ITEM # QTY PART # DESCRIPTION Part Number Description 510-7777-05 RIVETED BUTY ASSEMBLY #05, 830-1031-27 BUTY #27, PARIS PRO 510-7777-05 RIVETED BUTY ASSEMBLY #05, BLACK 237-5983-04 SCREW, 4-40 X 1/4" PFH - BLACK KNIGHT PRO 830-1031-27 BUTY #27, BLACK KNIGHT PRO... -
Page 52: Buty #8 Assembly
PARTS REFERENCE 5.39 BUTY #8 ASSEMBLY 5.41 BUTY #18 ASSEMBLY 511-2749-08 511-2749-18 ITEM # QTY PART # DESCRIPTION 510-7777-08 RIVETED BUTY ASSEMBLY #08, PARIS PRO 830-1031-28 BUTY #28, PARIS PRO 237-6331-00 SCREW, 4-40 X 1/4" PPH MS BLACK 550-5052-01 MINI POST - CLEAR 237-5809-00 SCREW, #6 X 1/2"... -
Page 53: Back Panel Assembly
PARTS REFERENCE 5.43 BACK PANEL ASSEMBLY 500-2467-00 ITEM # QTY PART # DESCRIPTION 525-1027-00 BACK PANEL - PARIS PRO 240-5101-00 8-32 T-NUT 237-5975-01 SCREW, 8-32 x 1/2 HWH SLOT SERR SW ZINC 511-1966-01 ELECTRIC GATE ASSEMBLY, RIGHT, PARIS 511-1966-02 ELECTRIC GATE ASSEMBLY, LEFT, PARIS PRO 237-5975-03 SCREW, 8-32 X 5/8"... -
Page 54: Specifications
SPECIFICATIONS 6. SPECIFICATIONS 500-55N1-01 SPECIFICATIONS, MECHANICAL, GAME SETUP SPECIFICATIONS, ENVIRONMENT Specification Imperial Metric Minimum Maximum Weight 210 lbs 96 kg Temperature, Operating 32 ℉ / 0 ℃ 104℉ / 40 ℃ Max dimensions, leg lev- 78 x 27.75 x 57 in 198 x 70.5 x 145 cm Temperature, Storage 32 ℉... -
Page 55: Warranty
Stern Pinball Inc (‘SELLER’) warrants only to the initial purchaser of its consciousness or convulsions that can lead to injury from falling down or products that the items listed below are free from defects in material striking nearby objects. - Page 56 1-800-KICKERS BLACK KNIGHT PRO #500-55N1-01 MANUAL #780-50N1-00 PARTS.SERVICE@STERNPINBALL.COM WWW.STERNPINBALL.COM *780-50N1-00* FACEBOOK.COM/STERNPINBALL...