Fortinet FortiGate FortiGate-800 Administration Manual page 152
Fortinet fortigate fortigate-800: user guide
Hide thumbs
Also See for FortiGate FortiGate-800:
- Installation and configuration manual (336 pages) ,
- Install manual (64 pages) ,
- Technical note (12 pages)
Table of Contents
Advertisement
RIP
152
Timeout
Redistribute:
Connected
Metric
Route-map
Static
Metric
Route-map
To configure RIP general settings
1
Go to Router > RIP > General.
2
Select the default RIP Version.
3
Change the Default Metric if required.
4
Select Enable Default-information-originate if the configuration requires advertising a
default static route into RIP.
5
Only change the RIP timers if required.
RIP timer defaults are effective in most configurations. All routers and access servers
in the network should have the same RIP timer settings.
6
Select Apply.
To configure RIP route redistribution
1
Go to Router > RIP > General.
2
Select Connected or Static or both.
3
Enter the Default Metric to be used for the redistributed routes.
4
Select a Route-map name.
5
Select Apply.
The time interval in seconds after which a route is declared unreachable.
The route is removed from the routing table. RIP holds the route until the
garbage timer expires and then deletes the route. If RIP receives an
update for the route before the timeout timer expires, then the timeout
timer is restarted. If RIP receives an update for the route after the timeout
timer expires but before the garbage timer expires then the entry is
switched back to reachable. The value of the timeout timer should be at
least three times the value of the update timer.
Advertise routes learned from static routes, or a direct connection to the
destination network.
Advertise routes learned from directly connected networks.
Enter the metric to be used for the redistributed connected routes.
Enter the name of the route map to use for the redistributed connected
routes. For information on how to configure route maps, see
list" on page
162.
Advertise routes learned from static routes.
Enter the metric to be used for the redistributed static routes.
Enter the name of the route map to use for the redistributed static routes.
For information on how to configure route maps,
page
162.
01-28006-0008-20041105
Router
"Route-map
"Route-map list" on
Fortinet Inc.
Advertisement
Table of Contents
