Control Panel - ElectrIQ EAP400D User Manual

CONTROL PANEL

POWER BUTTON:
Press to turn the unit on and off
CHILD LOCK: Hold the POWER button for 5
seconds until the unit bleeps once. This will
lock the controls and prevent them from been
adjusted. Exit child lock by holding the button
for another 5 seconds.
SPEED BUTTON:
Press the SPEED button to change the fan
speed. There are 3 fan speeds which can be
selected while the unit is in operation (Low,
Med, High). This provides the choice between
maximum air purification on high speed to
lower air flow but quieter operation mode
with low fan speed.
SLEEP MODE: Hold the SPEED button for 5
seconds until the unit bleeps once. This will
put the unit into sleep mode, the unit will
operate in low fan speed, with no lights
illuminated. To resume normal operation,
press the POWER button.
TIMER BUTTON:
The air purifier can be timed to operate for
intervals of 2, 4 or 8 hours, stopping
automatically when the selected duration has
elapsed.
With the unit operating, repeatedly press the
TIMER button to select the required timer
duration. The LED lights will indicate the
remaining operating time.
To cancel the timer, repeatedly press the
TIMER button until none of the timer lights
are illuminated.
REPLACE FILTERS: Hold the TIMER button for
5 seconds following replacing the filters to
reset the flashing "speed" indicator LED
MODE BUTTON:
Press the MODE button to cycle between
running the Ioniser and/or UV light. The LED's
above the button will indicate which of the
features are currently activated.
7