Hitachi Compute Rack 220S Replacement Manual page 54

Figure 4-3: Remove a failed HDD/SSD (Rear side)
Installing a HDD/SSD
1. Open the HDD tray lever of the replacing HDD/SSD.
2. Insert the HDD/SSD into the extension storage bay along the guide slowly.
3. Hold the lever and push the HDD/SSD into the extension storage bay slowly.
When the HDD/SSD stops at the bottom, slowly close the lever to lock the
HDD tray.
NOTICE
4-4
Install the same specification HDD/SSD with failed HDD/SSD.
Otherwise, the HDD/SSD may not be rebuilt correctly or may incur
abnormal operation.
Install the replacing HDD/SSD in the same extension storage bay
where the failed HDD/SSD has been removed. Otherwise, data may
be lost.
Replacing parts
Hitachi Compute Rack 220S CRU Replacement Guide
3
4
2