Next steps
1. Install the
battery
2. Install the
base cover
3. Install the
SD card
4. Follow the procedure in
Hard drive assembly
Removing the hard drive assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD card
3. Remove the
base cover
4. Remove the
battery
Steps
1. Lift the latch and disconnect the hard drive cable from the system board [1].
2. Remove the four (M2x3) screws that secure the hard drive assembly to the palm rest and keyboard assembly [2].
3. Lift the hard drive assembly along with its cable off the palm rest and keyboard assembly [3].
30
Disassembly and reassembly
after working inside your computer
before working inside your computer