Next steps
1. Replace the
battery
2. Replace the
base cover
3. Replace the
SD memory card
4. Follow the procedure in
WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
2. Remove the
SD card
3. Remove the
base cover
4. Remove the
battery
Steps
1. Remove the M2x3 screw that secures the WLAN card bracket to the system board [1].
2. Slide and remove the WLAN card bracket that secures the WLAN cables[2].
3. Disconnect the WLAN cables from the connectors on the WLAN card [3].
4. Lift the WLAN card away from the connector [4].
after working inside your computer
before working inside your computer
Disassembly and reassembly
23