Connection On The Device - ABB TZIDC-200 Operating Instruction

TZIDC-200 DIGITAL POSITIONER | OI/TZIDC-200-EN REV. C
Module for digital feedback SW1, SW2*
Terminals
Supply voltage
Output 'logical 0'
Output 'logical 1'
Direction of action
Description
* The module for analog feedback and the module for digital feedback have
separate slots and can be used together.
Assembly kits for limit monitor
Two proximity switches or microswitches for independent
signaling of the actuator position, switching points are
adjustable between 0 to 100%
Change from two to one column

Connection on the device

1 Cable gland
2 Blind plug
3 Terminals for option modules
Figure 16: Connection to device (example)
+41 / −42, +51 / −52
5 to 11 V DC
(Control circuit in accordance with
DIN 19234 / NAMUR)
< 1.2 mA
> 2.1 mA
Configurable
'logical 0' or 'logical 1'
2 software switches for binary position
feedback (position adjustable within
the range of 0 to 100 %, ranges cannot
overlap)
Limit monitor with proximity switches Limit 1, Limit 2
Terminals +41 / −42, +51 / −52
Supply voltage 5 to 11 V DC
(Control circuit in accordance with DIN
19234/NAMUR)
Direction of action Metal tag in proximity
switch
Type SJ2-SN (NC; log 1) < 1.2 mA
Limit monitor with 24 V microswitches Limit 1, Limit 2
Terminals
Supply voltage
Load rating
Contact surface
Mechanical position indicator
Indicator disk in enclosure cover linked with device feedback
shaft.
These options are also available for retrofitting by Service.
4 Terminal attachment kit for digital feedback
5 Terminals for basic unit
23
Metal tag outside
proximity switch
> 2.1 mA
+41 / −42, +51 / −52
Maximum 24 V AC/DC
Maximum 2 A
10 µm Gold (AU)