Advertisement
CLEANING INSTRUCTIONS
Clean the Filter (Weekly)
1
Make sure the main power switch is in the OFF (O) position.
2
3
vacuum or soft bristled brush.
4
Preventive Maintenance - (Perform Every 6 Months)
WARNING •
• Failure to perform preventive maintenance as required, may result in leaks and/or damage
to the unit. Damage resulting from failure to perform required maintenance and/or leaks is
not covered by the warranty.
• Turn off the main power switch before disassembly.
Seal and Bushing Replacement
WC-100196K - Auger seal
Kit # WC-100201
1
Replace every 3 months,
or as needed.
Empty the Bowls (Skip to step 3 if the bowls are already empty)
1
Place a large empty container under each dispenser tap. Turn the
main power switch to the ON position. Turn the mixing switches to
the ON
|
and the refrigeration switches to the OFF (O) position. Pull
(
)
out on each dispenser lever to drain the contents out of each bowl.
If the mixture is not frozen, hold the container up to the tap to reduce
splashing.
2
Once the bowls are empty, turn the main power switch to the OFF (O)
position.
FROZ BEV DISP, CLEANING INSTRUCTIONS
1
WC-100195K - Drum bushing
2
2
Replace every 6 months, or as needed.
Use kit # WC-100201 (2 sets per kit).
Also required: Curtis Part # WC-4916, food grade lubricant (sold separately)
continued...
WC-100010 - Tap seal
3
Kit # WC-100202
3
WC-100253 - Bowl seal
Replace once a year, or as needed.
Use kit # WC-100202 (2 sets per kit).
CI31
1
040419D
Advertisement
