SGM I-SERIES User Manual page 23

Honeycomb
The i-5 Series have available an optional honeycomb intended to control the light spill
while keeping a narrow beam angle, increasing the contrast and highlighting volumes.
This is an internal accessory that must be fitted between the glass front and the optics.
Although is must be ordered as an accessory, the fixture can be customized with the
honeycomb at request when ordering.
Note: This accessory is suitable for both permanent outdoor and indoor installa-
tions.
Figure 12: i-5 Series Honeycomb
For further information and other possibilities see www.sgmlight.com or contact your local SGM dealer.
23