Govaplast Play biplane User Manual

+/- 200 kg
Mounting
The biplane GP51 is delivered in some pre-assembled parts, and is
to be placed on a flat and solid surface.
Material
Ÿ
Solid posts and planks made of recycled plastic (PE), coloured
throughout (beige& green).
Ÿ Stainless steel screws (6 and 8 mm) and nail plugs
Ÿ
PE control-wheel
Ÿ Virgin PE sheets (12,5 and 19 mm), yellow, black and red, UV-
resistant
Maintenance
Maintenance of the recycled plastic material is very limited.
Cleaning with a soapy water and a sponge or soft brush. Rinse with
water to remove all dirt and soap. As the water absorption of the
material is less than 0,29%, it will not get stained by oil, grease and
other products. Besides, mosses and algae will have difficult to
adhere to the material and are very easy to remove.
Cleaning with high-pressure (max. 100 bar) is possible but is not
recommended and mostly not needed. If anyway, then spray with a
fan-shaped jet at minimum 30 cm from the plastic surface.
Painting or staining is useless as the paint will not stick attach to
the material.
Govaerts Recycling NV | Kolmenstraat 1324 | B-3570 Alken | info@govaplast.com | www.govaplast.com
GP
51
5
www.govaplast.com
Govaerts Recycling NV
Kolmenstraat 1324
3570 Alken, Belgium
User manual GP51
"Biplane"
( version 2015-01)
Latest version can always be found at www.govaplay.com
225
Inspection Requirements
Visual inspection
Depending on the intensity of use: weekly or monthly
Functional inspection
Depending on the intensity of use: monthly to four-monthly
Yearly inspection
Special attention to following issues:
- Worn, loose, damaged, missing parts
- Screws sticking out
- Anchorage
- Vandalism
- Loose control-wheel
275
TÜV-certified
1