Advertisement

According to EN1176, this bed-bench is not considered as being a play equipment.
Therefore, a TÜV-certificate is not required.
+/- 170 kg

Material

Solid posts and planks made of recycled plastic (PE), coloured
Ÿ
throughout.
Stainless steel screws and nail plugs
Ÿ
Virgin PE sheets (19 mm), UV-resistant
Ÿ

Mounting

The Bed-bench GP34 is delivered fully assembled.

Maintenance

Maintenance of the recycled plastic material is very limited.
Cleaning with a soapy water and a sponge or soft brush. Rinse with
water to remove all dirt and soap. As the water absorption of the
material is less than 0,29%, it will not get stained by oil, grease and
other products. Besides, mosses and algae will have difficult to
adhere to the material and are very easy to remove.
Cleaning with high-pressure (max. 100 bar) is possible but is not
recommended and mostly not needed. If anyway, then spray with a
fan-shaped jet at minimum 30 cm from the plastic surface.
Painting or staining is useless as the paint will not stick attach to
the material.
Govaerts Recycling NV | Kolmenstraat 1324 | B-3570 Alken | info@govaplast.com | www.govaplast.com
User manual GP34
"Bed-bench"
( version 2015-01)
Latest version can always be found at www.govaplay.com
186
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bed-bench and is the answer not in the manual?

Questions and answers

Summary of Contents for Govaplast Play Bed-bench

  • Page 1 User manual GP34 “Bed-bench” ( version 2015-01) Latest version can always be found at www.govaplay.com According to EN1176, this bed-bench is not considered as being a play equipment. Therefore, a TÜV-certificate is not required. +/- 170 kg Material Solid posts and planks made of recycled plastic (PE), coloured Ÿ...
  • Page 2 Installation The Bed-bench is delivered fully assembled. In case supervision of the playground is guaranteed, anchorage is not required. This product is not suited to be installed on a loose ground (sand, bark, woodchips, …) No need for safety zone and safety surface As this product is being considered as furniture there is no need to respect a safety zone.

Table of Contents