Fortinet FortiGate FortiGate-200A Administration Manual page 101

System config
FortiGate-200A Administration Guide
Queries
Traps
SNMP Event
To configure SNMP access to an interface in NAT/Route mode
Before a remote SNMP manager can connect to the FortiGate agent, you must
configure one or more FortiGate interfaces to accept SNMP connections. See
control administrative access to an interface" on page
1 Go to System > Network > Interface.
2 Choose an interface that an SNMP manager connects to and select Edit.
3 For Administrative Access, select SNMP.
4 Select OK.
To configure SNMP access to an interface in Transparent mode
Before a remote SNMP manager can connect to the FortiGate agent, you must
configure one or more FortiGate interfaces to accept SNMP connections. See
configure the management interface" on page
1 Go to System > Network > Management.
2 Choose an interface that the SNMP manager connects to and select SNMP.
3 Select Apply.
To enable SNMP and configure basic SNMP settings
1 Go to System > Config > SNMP v1/v2c.
2 Select the Enable check box to enable the FortiGate SNMP Agent.
3 Configure the following SNMP settings: Description, Location, and Contact.
4 Select Apply.
5 Add one or more SNMP communities.
To add an SNMP community
1 Go to System > Config > SNMP v1/v2c.
2 Select Create New.
3 Enter a Community Name to identify the SNMP community.
4 Configure Hosts, Queries, Traps, and SNMP Events.
5 Select OK.
Enter the Port number (161 by default) that the SNMP managers in this
community use for SNMP v1 and SNMP v2c queries to receive
configuration information from the FortiGate unit. Select the Enable
check box to activate queries for each SNMP version.
Enter the Local and Remote port numbers (162 by default) that the
FortiGate unit uses to send SNMP v1 and SNMP v2c traps to the SNMP
managers in this community. Select the Enable check box to activate
traps for each SNMP version.
Enable each SNMP event for which the FortiGate unit should send traps
to the SNMP managers in this community.
01-28006-0072-20041105
56.
60.
SNMP
"To
"To
101