Routing Table (Transparent Mode); Routing Table List - Fortinet FortiGate FortiGate-200A Administration Manual

System network

Routing table (Transparent Mode)

Routing table list

FortiGate-200A Administration Guide
Figure 11: DNS
Primary DNS Server
Secondary DNS Server Enter the secondary DNS server IP address.
To add DNS server IP addresses
1 Go to System > Network > DNS.
2 Change the primary and secondary DNS server IP addresses as required.
3 Select Apply to save the changes.
In Transparent mode, you can configure routing to add static routes from the
FortiGate unit to local routers.
Figure 12: Routing table
Create New Select Create New to add a new route.
# Route number.
IP The destination IP address for this route.
Mask The netmask for this route.
Gateway The IP address of the next hop router to which this route directs traffic.
Distance The the relative preferability of this route. 1 is most preferred.
Delete icon. Select to remove a route.
View/edit icon. Select to view or edit a route.
Move To icon. Select to change the order of a route in the list.
Enter the primary DNS server IP address.
01-28006-0072-20041105
Routing table (Transparent Mode)
61