NAT/Route mode installation
FortiGate-200 Installation Guide
To connect the FortiGate unit:
1
Connect the Internal interface to the hub or switch connected to your internal network.
2
Connect the External interface to the Internet.
Connect to the public switch or router provided by your Internet Service Provider. If
you are a DSL or cable subscriber, connect the External interface to the internal or
LAN connection of your DSL or cable modem.
3
Optionally connect the DMZ interface to your DMZ network.
You can use a DMZ network to provide access from the Internet to a web server or
other server without installing the servers on your internal network.
Figure 9: FortiGate-200 NAT/Route mode connections
Hub or Switch
POWER
STATUS
INTERNAL
EXTERNAL
DMZ
FortiGate-200
Internal Network
Internal
DM Z
CONSOLE
INTERNAL
EXTERNAL
DMZ
External
Public Switch
or Router
Internet
01-28004-0020-20040830
Connecting the FortiGate unit to the network(s)
DMZ Network
Web Server
Mail Server
Hub or Switch
33