Toshiba e-Studio2000AC Software Installation Manual page 119

5.INSTALLING PRINTER DRIVERS FOR UNIX/Linux
15 Enter the following command:
service cups start
If the CUPS has already been started, stop the CUPS service once by entering "service cups stop" command, and
then enter the above command to restart the CUPS service.
16 Enter the following command:
/usr/bin/cupsconfig
The Common UNIX Printing System page appears.
Open the browser and locate CUPS by typing
17
"http://localhost:631/" in the address box.
The Common UNIX Printing System page appears.
When IPP/SSL is enabled, specify "https://local host:443/" in the address field to access the Common UNIX
Printing System.
Click the [Manage Printers] link.
18
The Printer page appears.
Add a new https printer by clicking [Add Printer].
19
Configure the parameters as:
Name: <Any Name>
Location: <Optional>
Description: <Optional>
Device: Internet Printing Protocol (http)
Device URI: http://<IP address>:631/Print
Model/Driver: TOSHIBA
When IPP/SSL is enabled, specify as follows:
 Device: Internet Printing Protocol (https)
 Device URI: https://<IP address>:443/Print
Using CUPS Client (print commands lp, lpr, etc.) with -e option, the connection can be encrypted and printing can
be done in the above configured printer.
Confirm that the message notifying that the new printer has been properly added appears.
20
Go to the following page for configuring the print options:
21
 P.120 "Configuring print options"
Setting Up the CUPS 119