Summary of Contents for Amphenol RJS-XX-8MF1 Series
Page 1
Amphenol RJ-Switch IP65/68 rugged Military Ethernet Managed Switch - User Manual - Contents Section 1 Page 3 General Information Section 2 Page 4 Installation Section 3 Page 5 Power Wiring Section 4 Ethernet Wiring Page 8 Section 5 Page 11...
Page 2
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. Copyright & Trademarks: Copyright Amphenol, All Rights Reserved. Note: All information in this document is subject to change without notice.
Section 1 General Information This manual will help you install and maintain the Amphenol Military Ethernet Overview Managed switches. These products are extremely easy to install and operate because little or no user configuration is required. Once the Ethernet connections are made and the unit is powered up it will immediately begin to operate.
RJField range (see www.rjfield.com). Make sure to allow enough room to route your Ethernet cables. 36,5 Maxi RJSML8MF1 Managed Switch UM, rev A Page 4 of 13 Last Rev: 27-Jul-15 Amphenol – 948, Promenade de l‘Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com...
TVNSA 09 023 Heat shrink 804221 804221 The plugs are using crimp contacts. We suggest using hereunder tooling. Crimping tools for all models Amphenol No Military No Crimping tool For #22D: 809 801 For #22D: M22520/2-01 Positioner For #22D: 809 835...
Q Max: 21.82 mm V thread metric: M12x1-6g RJSML8MF1 Managed Switch UM, rev A Page 6 of 13 Last Rev: 27-Jul-15 Amphenol – 948, Promenade de l‘Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com...
Page 7
Screw the last ring at the rear of the backshell. 5. Install the heat-shrink molded piece. RJSML8MF1 Managed Switch UM, rev A Page 7 of 13 Last Rev: 27-Jul-15 Amphenol – 948, Promenade de l‘Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com...
Full / Half duplex operation The RJ45 ports of these switches support both full and half duplex flow control. IEEE 802.3 compliant The Amphenol Military Ethernet Switch strictly abides to the IEEE 802.3 standard for 10BaseT and 100BaseTX Ethernet communications. Plug and play This means that most functions or features of these switches are automatic and that there are minimal or no optional parameters that need to be set.
We sincerely hope that you never experience a problem with any Amphenol product. If Service you do need service, call Amphenol at +33(0) 450 89 28 00 and ask for Applications Information Engineering. A trained specialist will help you to quickly determine the source of the problem.
Need help?
Do you have a question about the RJS-XX-8MF1 Series and is the answer not in the manual?
Questions and answers