Panasonic FV-0511VQ1 Installation Instructions Manual page 9

INSTALLATION (NEW CONSTRUCTION) CONTINUED
8. Insert fan body and slide into adapter assy
with some strength, until the flange overlaps
the Flex-Z Fast bracket. Secure the fan
TM
body to Flex-Z Fast
self-drilling screws, plug connector to
receptacle and secure the fan body to adaptor
by using machine screw (M4X8). (Fig.6)
CAUTION CAUTION
Secure machine screw (M4X8) to the
suitable hole and not touch the Flex-Z
Fast bracket. Please fix the screw
TM
carefully to avoid screw slip teeth.
9. Finish ceiling work. Ceiling hole should be aligned
with the inside edge of the flange. (Fig.7)
10. Insert the grille mounting spring on the wiring
side into the slot. (Fig.8)
11. Insert the motion sensor on the grille and dress
the wire as shown. (Fig. 8)
12. Adjust Pick-A-Flow switch.(Refer to indication on
FEATURE)
13. Insert the other mounting spring into the slot as
shown and mount grille to fan body. (Fig.9)
CAUTION
Mount grille carefully so that lead wire is not
pinched.
bracket by using 2
TM
Joist
Plug connector
Machine
screw
(M4X8)
Receptacle
Ceiling
After finishing the ceiling job, fill gap between flange
and ceiling with caulk or other sealant to prevent air
leakage
Ceiling
Motion Sensor
(FV-0511VQC1
only).
Ceiling
Grille
2 Self-drilling
Fig.6
screws
Unit: inches (mm)
Fig.7
Clasp
Fig.8
Mounting spring
Gloves
Fig.9
English
9