Description; Unpacking; Supplied Accessories - Panasonic FV-0511VQ1 Installation Instructions Manual

GENERAL SAFETY INFORMATION CONTINUED
NOTICE
Provide make up air for proper ventilation.
Do not install the unit where ducts are configured as shown in below.
Excessive bending
When one switch is connected with two or more products in parallel, the unit may not function.
Therefore, parallel connection should not be allowed.

DESCRIPTION

These products are listed by UL under UL file No. E78414.
These products use a sirocco fan driven by a DC motor powered by an integral transformer. The motor is
designed to have long operating life, high dynamic response, higher speed ranges with saving energy.
The grille covering the fan body is a spring-loaded, quick remove type. A damper for preventing air counter
flow is provided. The blower uses a high-capacity sirocco fan developed to reduce the noise level.
(FV-0511VQC1 only)
This Panasonic ventilating fan model is equipped with a motion sensor and a humidity sensor that turn
on automatically when motion is detected, when humidity increases rapidly, or when humidity rises above
a 30% ~ 80% relative humidity set-point. It is user-adjustable to operate 0.5 ~ 60 minutes after the sensors
are no longer detected.

UNPACKING

Unpack and carefully remove the unit from carton.
Refer to the Supplied Accessories list to verify that all parts are present.

SUPPLIED ACCESSORIES

Part name
Grille
Flex-Z Fast
TM
bracket
(with 4
tapping screws
-ST4.2X20)
4
English
Successive bending
Appearance Quantity
Squeezed duct
Bend close to duct adaptor
Part name
Warranty
1
sheet
Installation
instructions
1
Self-drilling
screw
Adaptor
Appearance Quantity
1
1
4