Yamaha RX-S601 Firmware Update Manual page 5

6
Start firmware update
a. Press INFO key to start the update.
(Update process may take up to 10 minutes)
UPDATE SUCCESS
If "
*
exit from Advanced Setup. Your AV receiver is ready for normal use.
Caution
DO NOT interrupt power during the update.
In case the power is accidentally cut off resulting in a condition where you can't recover normal operation, refer to
the troubleshooting method (Troubleshooting CASE 2) on the last page.
b. When completed, "
UPDATE SUCCESS
c. Turn off the power of the receiver by pressing the
(power) key
7 Check the updated firmware version
a. Power on the AV receiver and press the SETUP key on the remote control.
b. Select "Network" > "Network Update".
c. Confirm that the firmware version is updated to the latest version.
Congratulations!
You have completed the firmware update. Your AV receiver is ready for normal use.
" appears, this means your receiver is already up-to-date. In this case, power off to
Firmware update in progress
UPDATE SUCCESS
INFO key
PLEASE...
" , " " and "
PLEASE...
(power) key.
RX-S601
POWER OFF!
" appears on the display.
POWER OFF!
USB port
SETUP key
5