Menu Items; Displaying The Menu Screen - Sharp PN-B401 Operation Manual

Displaying the menu screen

Video adjustment and settings of various functions are
enabled. This section describes how to use the menu items.
See page 23 for details of each menu items.
Caution
• Do not turn the main power switch off while the menu items
are being displayed. Doing so may initialize the settings.
TIPS
• Also check the time setting, network settings, and other
settings in the Software Guide.
nExample of operation
(Adjusting CONTRAST in the PICTURE menu)
1. Press the MENU button to display the menu screen.
SCREEN
SCREEN
AUTO
PICTURE
CLOCK
SETUP
PHASE
MONITOR
H-POS
MULTI/PIP V-POS
H-SIZE
OTHERS
V-SIZE
RESOLUTION SETTING
INPUT SIGNAL
RESET
1 9 2 0 x 1 0 8 0
2. Press the or
the ENTER button.
3. Press the or
SCREEN PICTURE
PICTURE BRIGHT
CONTRAST
SETUP
BLACK LEVEL
TINT
MONITOR
COLORS
SHARPNESS
MULTI/PIP
COLOR ADJUSTMENT
ADVANCED
OTHERS
RESET
1 9 2 0 x 1 0 8 0
22
E

Menu Items

D-SUB[RGB]
600
25
610
37
50
50
OK:[ENTER] END:[RETURN]
V: 60 Hz H: 67.5 kHz
button to select PICTURE, and press
button to select CONTRAST.
D-SUB[RGB]
31
30
30
30
30
12
BACK:[RETURN]
V: 60 Hz H: 67.5 kHz
4. Press the or button to adjust the setting.
SCREEN PICTURE
PICTURE BRIGHT
CONTRAST
SETUP
BLACK LEVEL
TINT
MONITOR
COLORS
SHARPNESS
MULTI/PIP
COLOR ADJUSTMENT
ADVANCED
OTHERS
RESET
1 9 2 0 x 1 0 8 0
For items that have , press the ENTER button to display
the sub menu.
5. Press the MENU button to close the menu screen.
TIPS
• The menu will differ depending on the input mode.
• The menu screen will close automatically if no operation is
performed for about 15 seconds. (SCHEDULE screen will
close in about 4 minutes.)
nMenu screen display
1
SCREEN
PICTURE
PICTURE BRIGHT
CONTRAST
SETUP
BLACK LEVEL
TINT
MONITOR
COLORS
SHARPNESS
MULTI/PIP
COLOR ADJUSTMENT
ADVANCED
OTHERS
RESET
1 9 2 0 x 1 0 8 0
1 Name of the menu
2 Input mode
3 An item being selected (highlighted)
4 Screen resolution of input signal, and other data.
TIPS
• Items that cannot be selected appear in gray.
(e.g. Function not supported by the current input signal)
D-SUB[RGB]
31
40
30
30
30
12
BACK:[RETURN]
V: 60 Hz H: 67.5 kHz
3 2
D-SUB[RGB]
31
30
30
30
30
12
BACK:[RETURN]
V: 60 Hz H: 67.5 kHz
4