Table of Contents
Advertisement
TForce P965
Onboard Serial Port 1
Select an address and corresponding interrupt for the first and second serial
ports.
The Choices: 3F8/IRQ4 (default), Disabled, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3,
Auto.
Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with
which I/O Address.
The Choices: 378/IRQ 7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
This item allows you to determine how the parallel port should function. The
default value is SPP .
The Choices:
SPP (de fault)
Using P arallel port as Standard P rinter Port.
EPP
Using P arallel P ort as Enhanced P arallel Port.
ECP
Using P arallel port as Extended Capabilities P ort.
ECP +EPP
Using P arallel port as ECP & EPP mode.
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices: 3 (default), 1.
22
Advertisement
Table of Contents
