Kodak Pocket Wireless Pico Projector User Manual page 18

NOTE: If the projector does not appear on the device list, you may need to update your device's
firmware. To upgrade, follow the steps below:
a. Connect to the MS ID as indicated in steps a–c above.
b. Open an internet browser and enter IP: 192.168.203.1
c. From this settings menu, you can select the Internet connection, Language, WiFi® password,
Default Mode (either Airplay or Miracast), Resolution, or Upgrade the firmware.
d. Select the upgrade option to update your devices firmware.
e. The device should now be able to mirror to the projector when the Screen Mirroring
option is selected.
For Android™ Devices:
Select the Android™ screening option on the
projector's WiFi® Display menu.
An Android™ device can be connected by 2 methods.
Method 1:
a. Select the settings menu, then More Networks, then Screen Mirroring.
b. On the screen mirroring menu, select the MS ID from the list.
c. After selecting the MS ID, your device screen should connect with the projector.
Method 2:
a. Swipe down on your device screen to display the hidden menu.
b. Select Screen Mirroring.
c. Select the MS ID on the list.
d. After selecting the MS ID, your device screen should connect with the projector.
18