Side-Discharging The Clippings - Toro 20334 Operator's Manual

Side-Discharging the Clippings

Use the side discharge for cutting very tall grass.
If the grass bag is on the machine and the bag-on-demand lever is in the Bagging position, move the lever to
the Recycling position; refer to Operating the Bag-on-Demand Lever (page 17).
Installing the Side-Discharge Chute
Lift up the side deflector and install the side-discharge chute (A and B of Figure 19).
g233435
Figure 19
Removing the Side-Discharge Chute
To remove the side-discharge chute, lift up the side deflector, remove the side-discharge chute, and lower the
side-discharge deflector.
18