For Best Performance - Panasonic KX-TGP600 Operating Instructions Manual

Important Information

For Best Performance

Operating Range
R The range of operation depends on the topography of your office, weather, or usage conditions,
because signals are transmitted between the base unit and the handset by radio waves.
R Normally, you get greater range outdoors than indoors. If there are obstacles such as walls, noise may
interfere with your telephone calls. In particular, high metal shelves or reinforced concrete walls will
restrict your operating range.
R A handset may not work when it is too far from the base unit depending on the structure of the building.
R We strongly suggest you hold the bottom half of the handset to ensure better call quality. Because, the
antenna is located in the upper half of the handset.
Noise
Occasional noise or interference may occur due to electromagnetic radiation from objects such as
refrigerators, microwave ovens, faxes, TVs, radios, or personal computers. If noise disturbs your
telephone calls, keep the handset away from these electrical appliances.
Environment
R Keep the product away from heating appliances and devices that generate electrical noise, such as
fluorescent lamps and motors. These noise sources can interfere with performance of the product.
R Do not place the product in rooms where the temperature is less than 0 °C (32 °F) or greater than
40 °C (104 °F).
R Allow 10 cm (3-15/16 in) clearance around the product for proper ventilation.
R Avoid environments with excessive smoke, dust, moisture, mechanical vibration, shock, or direct
sunlight.
R The apparatus is designed to be installed and operated under controlled conditions of ambient
temperature and a relative humidity.
Routine Care
R Unplug the AC adaptor from the AC outlet and disconnect the Ethernet cable before cleaning.
R Wipe the product with a soft cloth.
R Do not clean the product with abrasive powder or with chemical agents such as benzine or thinner.
R Do not use liquid cleaners or aerosol cleaners.
R Clean the terminal of the charger periodically.
Placement
R Do not place heavy objects on top of the product.
R Care should be taken so that objects do not fall onto, and liquids are not spilled into, the product.
R Place the charger on a flat surface.
10