Ipv6; Ipv6 Status; Ipv6 Wan - TP-Link AC1200 User Manual

Chapter 4
4 16

IPv6

This function allows you to enable IPv6 function and set up the parameters of the
router's Wide Area Network (WAN) and Local Area Network (LAN).
4 16 1

IPv6 Status

1 Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2 Go to IPv6 > IPv6
the router.
• WAN - This section shows the current IPv6 information of the router's WAN port,
including Connection
IPv6 DNS and Secondary IPv6
• LAN - This section shows the current IPv6 information of the router's LAN port,
including IPv6 Address Assign
4 16 2

IPv6 WAN

1 Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2 Go to IPv6 > IPv6
Status, and you can view the current IPv6 status information of
Type, IPv6 Address
DNS.
Type, IPv6 Address
WAN.
information, IPv6 Default
and Link-local
Configure the Router
Gateway, Primary
Address.
58