Led Control; Feedback - TP-Link AC1200 User Manual

Chapter 4
3. Click Get GMT to get time from the internet if you have connected to the internet.
¾ To set Daylight Saving Time:
1. Select Enable DaylightSaving.
2. Select the start time from the drop-down list in the
3. Select the end time from the drop-down list in the
4. Click Save.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log
in to the router successfully; otherwise, time-based functions will not take effect.
4 17 2

LED Control

The LED Control allows you to turn on or off the LEDs on your device according to a
specific time schedule.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
3. Enable the Night Mode.
4. Set the LED Off Time
4 17 3

Feedback

This page allows you to send your questions or suggestions to us, so that we can
resolve your issues and keep improving product features to give you a better network
experience. For technical problems, it is recommended to attach the configuration file
or system log of the device to help us investigate your case.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
> LED Control.
and click Save.
> Feedback.
Configure the Router
Start field.
End field.
64