TP-Link AC1200 User Manual page 31

Chapter 4
3. Follow one of the following three methods to connect your client device to the
router's Wi-Fi network.
Method ONE: Press the WPS Button on Your Client Device
1. Keep the WPS Status as
2. Select Press the WPS button of the new device within the next two minutes
Connect.
3. Within two minutes, press the WPS button on your client device.
4. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Method TWO: Enter the Client's PIN
1. Keep the WPS Status as
2. Select Enter new device
click Connect.
Enabled and click Add
Enabled and click Add
PIN, enter your client device's current PIN in the
Configure the Router
Device.
Device.
and click
PIN filed and
27