Left Trim - HP ProOne 400 Maintenance And Service Manual

Left trim

To remove the left trim:
1. Prepare the computer for disassembly (see
2. Remove the rear port cover (see
3. Remove the stand (see
4. Remove the access panel (see
5. Remove the top trim (see
6. Remove the optical drive (see
7. Remove the four Torx screws that secure the left trim to the computer (1).
8. Rotate the trim off the computer (2).
To install the left trim, reverse the removal procedures.
52 Chapter 4 Removal and Replacement Procedures
Preparing to disassemble the computer on page
Rear port cover on page
Attaching and removing a stand on page
Access panel on page
Top trim on page 48).
Replacing the optical drive on page
23).
20).
24).
30).
19).