C75 Level 2 Service Manual
7
Disassembly of C75
ESD concept; the internal circuits will be more susceptible to ESD because of
Note:
the use of exchangeable housing. The construction of the internal block must be/is
designed, in the best possible way, to protect the circuit against sparks.
The keypad must be completely closed to prevent any occurrence of an ESD
disruptive discharge. The SIM contacts may be open, thus reachable for ESD contact
discharge. This could lead to damage or destruction of the S-Goldlite pins.
It is a requirement for the service personnel to observe ESD protection rules while
performing servicing the C75.
Step 1
Front view of the C75
Step 3
Copyright © Siemens Pte Ltd.
All Rights Reserved
COM D CCQ APAC SLI
Step 2
Remove Battery cover.
Page 12 of 40
Back View of the C75
Siemens Technical Support Centre
Internal Use Only