S I E M E N S P T E L T D
SL65 Level 2 Service Manual
Disassembly of SL65
ESD concept; the internal circuits will be more susceptible to ESD because of
the use of exchangeable housing. The construction of the internal block must be/is
designed, in the best possible way, to protect the circuit against sparks.
The keypad must be completely closed to prevent any occurrence of an ESD
The SIM contacts may be open, thus reachable for ESD contact discharge. This
could lead to damage or destruction of the S-Gold pins.
It is a requirement for the service personnel to observe ESD protection rules while
performing servicing the SL65.
Front view of the SL65
Remove Battery cover.
Copyright © Siemens Pte Ltd.
All Rights Reserved
ICM MP CCQ SLI RHQ
Remove Battery – push the catch in the direction shown.
Page 13 of 13
Back View of the SL65
Siemens Technical Support Centre
Internal Use Only