JVC XV-S40BK Service Manual page 7

Removing the rear panel (see Fig.5)
*Prior to performing the following procedure, remove
the top cover.
1.Remove the six screws D attaching the rear panel
on the back of the body.
Removing the front panel assembly
* Prior to performing the following procedure, remove
the top cover.
* There is no need to remove the mechanism assembly.
1.Remove the one screw E attaching the front panel
assembly on the bottom chassis.
2.Disconnect the wire from CN702 and CN703 on the
main board respectively.
3.Hook c and d are removed respectively, and the front
panel assembly is removed.
Removing the main board (see Fig.8)
* Prior to performing the following procedure, remove
the top cover, mechanism assembly and rear panel.
1.Disconnect the wire from CN702 and CN703 on the
main board respectively.
2.Remove the four screws F attaching the main board
on the bottom chassis.
(see Fig.6,7)
Front panel
assembly
F
XV-S40BK/XV-S42SL/XV-S45GD/XV-S30BK
Rear panel
D
D
Fig.5
Hook d
E
Hook c
Hook d
CN703
Fig.7
F
CN703
Fig.8
D
Fig.6
CN702
F
CN702
F
1-7