Sharp AQUOS XU Series LC-70XU830X Operation Manual page 75

<<
Devices Operation
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋﺭﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA
Audio Out (Continue)
Audio Setup
You can output digital audio to an AV amplifier
or similar device whose DIGITAL AUDIO
INPUT terminal is connected to the DIGITAL
AUDIO OUT terminal on the TV. Please select
an audio output format compatible with the
audio format of the programme you are
watching and the equipment connected.
PCM: For connecting to equipment that does
not support Dolby Digital. The same audio
(main, sub, or main/sub) as the audio of the
programme being viewed is output.
2-channel audio with a sampling rate of
48 kHz or less is output as linear PCM
audio.
Bitstream: For connecting to an audio
system that supports Dolby Digital. Audio
is output through both the main and sub
channels.
NOTE
Analog channel audio, Video/Component
input audio, PC input audio and HDMI-
Analog input audio are output in PCM mode
even when "Bitstream" is selected.
PCM digital input signals are output in PCM
mode even when "Bitstream" is selected.
EN 4-5
>>