Sharp AQUOS XU Series LC-70XU830X Operation Manual page 66

<<
TV Setup Operation
Example
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋﺭﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA
General (Continue)
Advanced
CI Menu (Continue)
NOTE
EN 3-45
It takes a few minutes to certify the licence
key when you insert a CA card into the CI
module for the first time. This process may
fail when there is no antenna input or you
have never run "Auto installation".
The CI module sometimes upgrades its
firmware. You may not receive any TV
images before upgrading. You can only use
the POWER during upgrading.
Copy protected content may not be output
or may be output with a copy control signal.
The protect icon* is displayed when INFO is
pressed while watching copy protected
contents.
*Protect icon:
If the TV displays an update confirmation
message for the CA card while receiving CI
compatible broadcasts, follow the screen
prompts.
Make sure that the CI module is properly
inserted.
If the old CAM is used, authentication may
fail. In such cases, contact the contracted
service provider.
>>