Devices - Sharp AQUOS XU Series LC-70XU830X Operation Manual

<< How to select the TV Mode

Devices

Full screen view
Switching between connected devices is possible on the Devices full screen.
1. Press / / / to select the input source, and then press (ENTER).
2. Press / to select the "Switch to Device", and the press (ENTER).
An image from the selected source automatically displays.
If the target input is not connected, you will be able to switch to the input, but the correct video and audio will not be output. Be sure to connect the
equipment beforehand.
NOTE
To display the Devices in the full screen or as a peek screen, see page 2-1.
Changing from a full screen view to another mode is possible.
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA
EN 2-8
>>