Erasing Codes - Autel AutoLink AL319 Manual


If retrieved DTCs contain any manufacturer specific or
enhanced codes, a "Manufacturer specific codes are found!
Press any key to select vehicle make!" message comes up
prompting you to select vehicle manufacturer to view DTC
definitions. Use SCROLL button to select manufacturer and
then press ENTER/Exit button to confirm.

If the manufacturer of your vehicle is not listed, use the
SCROLL button to select Other and press the ENTER/Exit
button.
5) Select Previous Menu from the Read Codes screen, and press
ENTER/Exit button to return to previous menu.

4.2 Erasing Codes

CAUTION: Erasing the Diagnostic Trouble Codes may allow the
scan tool to delete not only the codes from the vehicle's on-board
computer, but also "Freeze Frame" data and manufacturer specific
enhanced data. Further, the I/M Readiness Monitor Status for all
vehicle monitors is reset to Not Ready or Not Complete status. Do
not erase the codes before the system has been checked completely
by a technician.
NOTE: Erasing codes does not mean that trouble codes in ECU
have been eliminated completely. As long as there is fault with the
vehicle, the trouble codes keep on presenting.
Vehicle Manufacturer 1/28
BUICK
BMW
CADILLAC
CHEVROLET
CHRYSLER
FORD
Figure 4.6
28