Autel AutoLink AL319 Manual page 17

This function allows you to turn on/off the build-in speaker for key
pressing.

The default setting is Beep On.
1) From System Setup screen, use the SCROLL button to select
Key Beep Set and press the ENTER/Exit button.
2) From Key Beep Set menu, use the SCROLL button to select
Beep ON or Beep OFF to turn on/off the beep.
3) Press the ENTER/Exit button to save your selection and return
to previous menu.
Status Beep Set

The default setting is Beep On.
This function allows you to turn on/off the build-in speaker for the
LEDs in diagnostic testing. Different audio tone corresponds to
different LED lamp. This function is invaluable when working in
bright areas where LED illumination alone is not sufficient.
1) From System Setup screen, use the SCROLL button to select
Status Beep Set and press the ENTER/Exit button.
2) From Status Beep Set menu, use the SCROLL button to select
Beep ON or Beep OFF to turn on/off the beep.
Key Beep Set
Beep ON

 Beep OFF
Figure 3.6
16
1/2