Cisco Nexus 9000 Series Configuration Manual page 159

Configuring Link Level Flow Control
Command or Action
Step 4 (Optional) show queuing llfc-queue [interface
interface-list] [module module] [detail]
Example:
switch(config)# show queuing llfc-queue interface
ethernet 1/1 detail
Step 5 (Optional) clear queuing llfc-queue [interface
interface-list] [module module]
Example:
switch(config)# clear queuing llfc-queue interface
ethernet 1/1
Example
The following is an example detail output of the show queuing llfc-queue command for an Ethernet
1/1 interface:
switch# show queuing llfc-queue interf e 1/1 detail
slot
=======
+----------------------------------------------------+
Global watch-dog interval [Enabled]
+----------------------------------------------------+
+----------------------------------------------------+
Global LLFC watchdog configuration details
LLFC watchdog poll interval
LLFC watchdog auto-restore multiplier
LLFC watchdog fixed-restore multiplier
+----------------------------------------------------+
+----------------------------------------------------+
Ethernet1/1 Interface LLFC watchdog: [Enabled]
+----------------------------------------------------+
+----------------------------------------------------+
| QOS GROUP 6 [Active] LLFC [YES] LLFC-COS [6]
+----------------------------------------------------+
|
+----------------------------------------------------+
1
Cisco Nexus 9000 Series NX-OS Quality of Service Configuration Guide, Release 7.x
Configuring a Link Level Flow Control Watchdog Interval
Purpose
When the LLFC watchdog no-drop queue is
Note
restored, a system logging message entry is
created to record the conditions of the queue.
The following is an example of the message:
Error Message TAHUSD-SLOT#-2-
TAHUSD_SYSLOG_LLFCWD_QUEUE_RESTORED :
[chars]
Description : NO DROP Queue Restored due
to LLFC WatchDog timer expiring message
Displays the LLFCWD statistics. See the output example
at the end of this procedure.
Clears the LLFCWD queue statistics.
: 100 ms
: 10
: 0
| Stats |
145